Focus on fan equipment production for 24 years

With the power of integrity, forge the "Xinyuan" brand!

The X45.25 cement kiln barrel cooling device is a new type of special cooling equipment. It is mainly used in the cement industry to cool down the kiln body when burning cement clinker. It can also be used to cool other rotary kilns. This device is a movable air-cooling device.

II. Structure

This equipment consists of a small frame, a windmill and a nozzle.

Small frame: welded from angle steel. It has the advantages of compact structure, beautiful appearance and practicality. it acts to support the wind

The function of the machine and the hairdryer, together with the wheels, constitutes a parallel moving device.

Fan: The fan adopts a diagonal flow fan, which is a medium-pressure fan with high efficiency and low noise. It’s time to be air-cooled

important part of the device. The fan is composed of cylinder, impeller, motor and other parts

3. Technical parameters

Please contact technical staff for details

 

 

Place the device on the paved track. The track is recommended to be 14b (140mmX60mmx8mm).

Channel steel. The track spacing should be guaranteed to be 720±5mm and not allowed to be less than 720mm.

The fan power supply requirements are three-phase AC, 380V, 50HZ. Equipped with dedicated power transmission racks or mobile cables.

Before operation, check whether all connecting parts are tight and remove foreign matter in the flow channel. Turn the fan impeller, it should not

There is friction.

5. Maintenance and maintenance

The temperature of the blowing medium should not exceed 60°C, the dust content should not exceed 150mg/m ³ , there should be no debris with a diameter of more than 1mm, and it should not be explosive or corrosive to facilitate the normal operation of the fan. If the product is found to be abnormal during use, it must be repaired immediately. In addition, dust, dirt and other impurities inside the fan should be removed regularly.