Focus on fan equipment production for 24 years

With the power of integrity, forge the "Xinyuan" brand!

GD30K2-12 type axial flow fan

I. Purpose of the fan：

GD30K2-12 type axial flow fan, also known as T30-C type axial flow fan, can be connected in the middle of the pipeline as part of the pipeline. It is suitable for chemical industry, papermaking and other factories to transport air below 60 degrees and various gases harmful to the motor.
　 This fan is divided into five machine numbers according to its impeller diameter: NO 6, 7, 8, 9, and 10. There are two types of leaves: 4 and 6. The blade installation angles can be made into four types: 15 degrees, 20 degrees, 25 degrees, and 30 degrees. The motor is installed on the upper part of the hair dryer, and an adjustable motor base plate supports the motor and can adjust the center distance. All are driven by triangle belts. The bearing box is fixed in a sealed protective cylinder in the center of the air duct and is isolated from the medium.
　 Fans are generally made of welded steel. If you are transporting corrosive or flammable gases, you can make a request for special production when ordering.

II. Performance parameter table of GD30K2-12 axial flow fan (4 blades)    III. GD30K2-12 type axial flow fan performance parameter table (6 blades)